WIZFi360-EVB-Pico

SKU: wizfi360-evb-pico Category: Tag:

560.00580.00

Availability: In Stock

WizFi360-EVB-Pico is based on Raspberry Pi RP2040 and adds Wi-Fi connectivity using WizFi360. It is pin compatible with Raspberry Pi Pico board and can be used for IoT Solution development.

Lead Time : 4-6 weeks

580.00

Product Quantity Price per Unit
1 - 249 580.00
250 - 2499 570.00
2500+ 560.00
SKU: wizfi360-evb-pico Category: Tag:

Description

Overview

WizFi360-EVB-Pico is based on Raspberry Pi RP2040 and adds Wi-Fi connectivity using WizFi360. It is pin compatible with the Raspberry Pi Pico board and can be used for IoT Solution development.

  • Raspberry Pi Pico Clone
  • Wi-Fi (WizFi360)
Features
  • RP2040 microcontroller with 2MByte Flash
  • Dual-core cortex M0+ at up to 133MHz
  • 264kByte multi-bank high performance SRAM
  • External Quad-SPI Flash with eXecute In Place (XIP)
  • Includes WizFi360-PA
  • Supports Hardwired Internet Protocols: TCP, UDP, WOL over UDP, ICMP, IGMPv1/v2, IPv4, ARP, PPPoE
  • WiFi 2.4G, 802.11 b/g/n
  • Support Station / SoftAP / SoftAP+Station operation modes
  • Support “Data pass-through” and “AT command data transfer” mode
  • Support serial AT command configuration
  • Support TCP Server / TCP Client / UDP operating mode
  • Support configuration of operating channel 0 ~ 13
  • Support auto 20MHz / 40MHz bandwidth
  • Support WPA_PSK / WPA2_PSK encryption
  • Support built-in unique MAC address and user configurable
  • Industrial grade (operating temperature range: -40 ° C ~ 85 ° C)
  • CE, FCC certification
  • Includes 16M-bit Flash Memory
  • Micro-USB B port for power and data (and for reprogramming the Flash)
  • 40 pin 21×51 ‘DIP’ style 1mm thick PCB with 0.1″ through-hole pins also with edge castellations
  • 3-pin ARM Serial Wire Debug (SWD) port
  • Built-in LDO
Hardware Specification
Pin-out

WizFi-EVB-Pico pinout is directly connected to the GPIO of RP2040 as shown in the picture above. It has the same pinout as the Raspberry Pi Pico board. However, GPIO4, GPIO5, GPIO6, GPIO7, GPIO20 are connected to WizFi360 inside the board. These pins enable UART communication with WizFi360 to use Wi-Fi function. If you are using the Wi-Fi function, these pins cannot be used for any other purpose.

The RP2040 GPIO used inside WizFi360-EVB-Pico is as follows.

I/OPIN NAMEDESCRIPTION
OGPIO4Connected to RXD1 on WizFi360
IGPIO5Connected to TXD1 on WizFi360
OGPIO6Connected to RTS1 on WizFi360
IGPIO7Connected to CTS1 on WizFi360
OGPIO20Connected to RST on WizFi360
IGPIO24VBUS sense – high if VBUS is present, else low
OGPIO25Connected to user LED
IGPIO29Used in ADC mode (ADC3) to measure VSYS/3

Apart from GPIO and ground pins, there are 7 other pins on the main 40-pin interface:

PIN NO.PIN NAMEDESCRIPTION
PIN40VBUSMicro-USB input voltage, connected to micro-USB port pin 1. Nominally 5V.
PIN39VSYSMain system input voltage, which can vary in the allowed range 4.3V to 5.5V, and is used by the on-board LDO to generate the 3.3V .
PIN373V3_ENConnects to the on-board LDO enable pin. To disable the 3.3V (which also de-powers the RP2040 and W5100S), short this pin low.
PIN363V3Main 3.3V supply to RP2040 and W5100S, generated by the on-board LDO.
PIN35ADC_VREFADC power supply (and reference) voltage, and is generated on W5100S-EVB-Pico by filtering the 3.3V supply.
PIN33AGNDGround reference for GPIO26-29.
PIN30RUNRP2040 enable pin, To reset RP2040, short this pin low.

Operation Condition

ITEMDESCRIPTION
Operation Temperature MAX85C (including self-heating)
Operation Temperature MIN-20C
VBUSDC 5V (+/- 10%)
VSYS MinDC 4.3V
VSYS MaxDC 5.5V
 
Technical Reference
RP2040 Datasheet :
Download RP2040 Datasheet

 

WizFi360 Datasheet :
Download WizFi360 Datasheet

 

Schematic

 
Schematic & Part list & Gerber File
 

Dimension (Unit : mm)

Firmware Example
Please refer to the below links to find firmware examples.

Reviews

There are no reviews yet.

Be the first to review “WIZFi360-EVB-Pico”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsWIZFi360-EVB-Pico removeWIZnet Ethernet HAT remove
Image
SKUwizfi360-evb-picowiznet-ethernet-hat
Rating
Rated 0 out of 5
Rated 0 out of 5
Price
560.00580.00
400.00
Stock

Lead Time : 4-6 weeks

52 in stock | Lead Time : 4-6 weeks

Availability52 in stock | Lead Time : 4-6 weeks
Add to cart

Add to cart

Add to cart

DescriptionWizFi360-EVB-Pico is based on Raspberry Pi RP2040 and adds Wi-Fi connectivity using WizFi360. It is pin compatible with Raspberry Pi Pico board and can be used for IoT Solution development.WIZnet Ethernet HAT (Hardware Attached on Top) is a Raspberry Pi Pico pin-compatible board that utilizes W5100S and supports both 3.3V & 5V.
Content
Overview

WizFi360-EVB-Pico is based on Raspberry Pi RP2040 and adds Wi-Fi connectivity using WizFi360. It is pin compatible with the Raspberry Pi Pico board and can be used for IoT Solution development.

  • Raspberry Pi Pico Clone
  • Wi-Fi (WizFi360)
Features
  • RP2040 microcontroller with 2MByte Flash
  • Dual-core cortex M0+ at up to 133MHz
  • 264kByte multi-bank high performance SRAM
  • External Quad-SPI Flash with eXecute In Place (XIP)
  • Includes WizFi360-PA
  • Supports Hardwired Internet Protocols: TCP, UDP, WOL over UDP, ICMP, IGMPv1/v2, IPv4, ARP, PPPoE
  • WiFi 2.4G, 802.11 b/g/n
  • Support Station / SoftAP / SoftAP+Station operation modes
  • Support “Data pass-through” and “AT command data transfer” mode
  • Support serial AT command configuration
  • Support TCP Server / TCP Client / UDP operating mode
  • Support configuration of operating channel 0 ~ 13
  • Support auto 20MHz / 40MHz bandwidth
  • Support WPA_PSK / WPA2_PSK encryption
  • Support built-in unique MAC address and user configurable
  • Industrial grade (operating temperature range: -40 ° C ~ 85 ° C)
  • CE, FCC certification
  • Includes 16M-bit Flash Memory
  • Micro-USB B port for power and data (and for reprogramming the Flash)
  • 40 pin 21×51 ‘DIP’ style 1mm thick PCB with 0.1″ through-hole pins also with edge castellations
  • 3-pin ARM Serial Wire Debug (SWD) port
  • Built-in LDO
Hardware Specification
Pin-out

WizFi-EVB-Pico pinout is directly connected to the GPIO of RP2040 as shown in the picture above. It has the same pinout as the Raspberry Pi Pico board. However, GPIO4, GPIO5, GPIO6, GPIO7, GPIO20 are connected to WizFi360 inside the board. These pins enable UART communication with WizFi360 to use Wi-Fi function. If you are using the Wi-Fi function, these pins cannot be used for any other purpose.

The RP2040 GPIO used inside WizFi360-EVB-Pico is as follows.

I/OPIN NAMEDESCRIPTION
OGPIO4Connected to RXD1 on WizFi360
IGPIO5Connected to TXD1 on WizFi360
OGPIO6Connected to RTS1 on WizFi360
IGPIO7Connected to CTS1 on WizFi360
OGPIO20Connected to RST on WizFi360
IGPIO24VBUS sense – high if VBUS is present, else low
OGPIO25Connected to user LED
IGPIO29Used in ADC mode (ADC3) to measure VSYS/3

Apart from GPIO and ground pins, there are 7 other pins on the main 40-pin interface:

PIN NO.PIN NAMEDESCRIPTION
PIN40VBUSMicro-USB input voltage, connected to micro-USB port pin 1. Nominally 5V.
PIN39VSYSMain system input voltage, which can vary in the allowed range 4.3V to 5.5V, and is used by the on-board LDO to generate the 3.3V .
PIN373V3_ENConnects to the on-board LDO enable pin. To disable the 3.3V (which also de-powers the RP2040 and W5100S), short this pin low.
PIN363V3Main 3.3V supply to RP2040 and W5100S, generated by the on-board LDO.
PIN35ADC_VREFADC power supply (and reference) voltage, and is generated on W5100S-EVB-Pico by filtering the 3.3V supply.
PIN33AGNDGround reference for GPIO26-29.
PIN30RUNRP2040 enable pin, To reset RP2040, short this pin low.

Operation Condition

ITEMDESCRIPTION
Operation Temperature MAX85C (including self-heating)
Operation Temperature MIN-20C
VBUSDC 5V (+/- 10%)
VSYS MinDC 4.3V
VSYS MaxDC 5.5V
 
Technical Reference
RP2040 Datasheet :
Download RP2040 Datasheet

 

WizFi360 Datasheet :
Download WizFi360 Datasheet

 

Schematic

 
Schematic & Part list & Gerber File
 

Dimension (Unit : mm)

Firmware Example
Please refer to the below links to find firmware examples.

 Overview

WIZnet Ethernet HAT (Hardware Attached on Top) is a Raspberry Pi Pico pin-compatible board that utilizes W5100S and supports both 3.3V & 5V.

  • Raspberry Pi Pico Pin-Compatible
  • Ethernet (W5100S Hardwired TCP/IP CHIP)

Features

  • Includes W5100S
  • Supports Hardwired Internet Protocols: TCP, UDP, WOL over UDP, ICMP, IGMPv1/v2, IPv4, ARP, PPPoE
  • Supports 4 Independent Hardware SOCKETs simultaneously
  • Internal 16 Kbytes Memory for TX/ RX Buffers
  • Operation Voltage 3.3V / 5V
  • Built-in LDO (LM8805SF5-33V)
  • SPI Interface
  • 5V I/O tolerance
  • 10 / 100 Ethernet PHY embedded
  • Supports Auto Negotiation
  • Full / Half Duplex
  • 10 / 100 Based
  • Built-in RJ45 (RB1-125BAG1A)
Weight9.07
DimensionsN/AN/A
Additional information
Weight 9.07 g